1. Open the style.css

2. Search for the h1.logo-name and change the display property to none, as shown in the image below.

3. Now refresh your site and you wouldn’t see the site title there anymore!!!

Here are the steps to create a bootable USB drive:
I. Insert your USB drive into one USB port on your computer

II. Click the “Start” button at the bottom left on your computer screen

III. Type “cmd” in the RUN window to open a command prompt

IV. Type “disk parts” into a command prompt and press Enter. After that type “list disk” and press Enter again.

V. Determine which of the disks that display the list of which is a USB drive. (For example, 4GB USB drive, then the option with 4GB size that you need to see). Record the number that identifies your USB drive it in the paper.

VI. Type the following command into the command prompt to format on a USB drive.

“Select the disk A,” replace “A” with the number you get in step 5 earlier. Press Enter
“Clean.” Press Enter
“Create Partition Memory.” Press “Enter.”
“Select Partition A.” Press “Enter.”
“Format FS = NTFS.” Press “Enter.”
“Assign.” Press “Enter.”
“Exit.” Press “Enter.”

VII. Insert the installation CD of Windows XP or Vista you. Your computer will read the installation CD, and a window will appear on the screen. List of all drives will be displayed there. Look for the letter which is a symbol of the CD-ROM and a USB drive. Take note of these letters in the paper.

VIII. Type the following command into the command prompt:

“B: CD boot,” replace “B” letter which is the symbol of the CD-ROM. Press “Enter.”
“CD boot.” Press “Enter.”
“Bootsect.exe/NT60 C:,” replace “C” with the letter which is a symbol of the USB Drive. Press “Enter.”

IX. Copy the boot information from the installation CD to a USB drive by entering the following command into the command prompt:
“Xcopy c: *.* / s / e / f B: /,” replace “B” letter which is the symbol of the CD-ROM and replace “C” with the letter which is a symbol of the USB drive. Press “Enter.”

Let the computer to copy data from the installation CD to a USB drive.

X. Unplug the USB drive from the USB port, replace the lid, and give the label “bootable” with markers. Save the USB drive it in a safe place. Remove your Windows installation CD and return it to its place.

Solution:While setting up the wordpress official POT file in Poedit you need to explicitly specify following lines in the Plural Forms filed in the settings window.
nplurals=2; plural=n != 1;

Example:

Once you have added the line you will see the string which was causing problem in following way. There will be a separate filed for translating the plural forms.

Although there could be numerous ways to get it fixed. However, this situation triggered me to give a try this fascinating Windows service (RIS). And finally I was able to bring my machine alive. Let’s see how I did it.

How to do RIS?

1. First of all what we need is, a Windows Server computer with following configurations:

• Active Directory
• Domain Control
• DHCP enabled.

2. Once you have all of the above features, now install RIS from Add/Remove program. From Add/Remove, click on Add/Remove Windows Components and install RIS.

3. After installing RIS restart the server computer.

4. Once computer is restarted login with the admin privileges and insert Windows OS CD/DVD into the drive and then select Remote Installation Service Setup. Because when you start Remote Installation Service Setup it will compile all the necessary files and folders from the disk to create installation file. To thoroughly understand the process read the wizards carefully and proceed.

5. After completing this process, hock your dead/new/client computer to network and boot it with PXE LAN (network boot) and follow the instructions and proceed.

6. That’s it! And using this service one can install Windows on multiple computers at a give time.

This KB article applies to moderate computer geek! Have fun……..

Contact: dorjeeoutlook@gmail.com

Requrements:
Computer Background (BCA,DOEACC ‘O’ and ‘A’ levels or Diplomay holder)
BA or undergraduate (with minimum 6 months experience)
Freshers with minimum 6 months experience.
PAN card required for bank processing.

Salary: +15K per month with incentives in $.

Don’t Miss this opportunity if you are looking for Technical Support Jobs at Bangalore.
Good Luck.

Solution: Disable the proxy setting or remove the localhost IP address.
Steps:
1. Click on Tools option and select Internet Options as shown below.

2. Click on Connection Tab and click on LAN settings as shown below.

3. Now uncheck Proxy server or remove the localhost IP 127.0.0.1 and the port number. Or simply uncheck the proxy server setting as shown below.

Winsock settings(Repair/Reset): Most of the Internet connectivity problems arise out of corrupt Winsock settings. Windows sockets settings may get corrupted due to the installation of a networking software, or perhaps due to Malware infestation. You will be able connect to the Internet, but the packets won’t transfer back and forth. And errors such as Page cannot be displayed may occur when using Internet Explorer. This article lists the method to reset/repair the Winsock configuration to defaults.

Tools: “netsh winsock reset” command

This command resets the Winsock catalog to the default configuration. This can be useful if a malformed LSP is installed that results in loss of network connectivity. While use of this command can restore network connectivity, it should be used with care because any previously-installed LSPs will need to be re-installed.

netsh winsock show catalog

This command displays the list of Winsock LSPs that are installed on the computer.

To output the results to a file type this in Command Prompt (CMD.EXE)

Type, netsh winsock show catalog > C:\lsp.txt

Requirements:
Basic Database knowledge table, structure, fields etc
Basic SQL command like CREATE, INSERT, UPDATE etc
Textpad software (can be downloaded and optional)
Regular Expression (Optional) if known can speedup the entire process.
Need two separate database table to hold the results (VI to X) and (XI)

Database Table Structure:

STEPS
1. Open the Database table by typing following URL:
www.tcvselakui.org/cpanel
Provide following username and password:
Username: *****
Password: ******

2. Cpanel window will open up and scroll down and search for PHPMyAdmin and open it, this will open the Database.

3. Select database, our database name is (tcvsela_onlineresult).

4. Now create two new tables to hold the third term result, this is because of difference of subject taken by students. Table structure should be same as other term table. I have provided the table structure above kindly refer it. To do it one has to use SQL CREATE command.

5. After creating the tables now it’s time to INSERT the results. To do it one has to use SQL INSERT command.

6.

These are the steps to insert student’s results.
NOTE: This is an easy way to upload the results but it takes time. To really make it faster one needs to do some extra work such as converting the excel sheet into CVS file and then quoting all the data fields. After this, you can upload entire class at a time.

Posted by Jangchup Dorjee for TCV Selakui

]]>